Change visitor typeHUBDYNO Specification Overview
. : GENERAL SPECIFICATION OVERVIEW : .

For detailed specification of specific HUBDYNO® model please contact Rototest for a Data sheet.
Power & Torque
HUBDYNO® 2WD up to 1005 bhp / 3800 Nm (2803 lb-ft)
HUBDYNO® 4WD up to 1510 bhp / 6000 Nm (4425 lb-ft)
Standard accessories kit
Included as standard
  • ROTOTEST® DynoVision™ Basic single-seat license
  • ROTOTEST® Datmon™ Basic single-seat license
  • Torque rod for calibration
  • Complete oil-fill with advanced system fluid
  • ROTOTEST® Wheel adapters, 5 stud
  • ROTOTEST® Wheel bolts M12x1.5
  • User and service manual (English)
General
Installation type Above-ground, completely on-wheels, easy to move for a single person.
Electrical power supply single 240 VAC (8A) or 120 VAC (16A)
Cooling water supply None (air-cooled)
Compressed air supply None
Operating environment
Ambient temperature range +15 °C to +40 °C / +60 °F to +105 °F
Relative humidity 10% to 90%, non-condensing


. : SYSTEM OPTIONS & ACCESSORIES : .

Although the HUBDYNO® by Rototest is limited in options and accessories compared to its industrial cousin, the ROTOTEST® VPA-RX™, there are a number of ways you can make modifications and additions to your system in order to personalize and optimize it for your specific business. Some options are available as purchase and some as rental-only.

System Options
Suspension shock-absorber upgrade (adjustable) Upgrades dynamometer suspension system with three way adjustable Ohlins shock-absorber.
TCU cooling upgrade Additional cooling elements for Typhoon Cooling Unit™, TCU
Hydraulic hose length extension Extended oil hose length for flexibility in positioning the Typhoon Cooling Unit™(s).
UPS capacity upgrade Upgrades the Uninterruptible Power Supply, UPS for extended battery operation.
Flat panel display rack mounted on DCU cabinet Flat panel mounting for 2 monitors on top of Dyno Control Unit, DCU cabinet.
Printer upgrade to colour laser Upgrades colour ink printer to colour laser printer.
Flat panel size upgrade Upgrades monitor to larger size.
DCU cooling upgrade Additional cooling capacity of Dyno Control Unit, DCU cabinet.
DCU 4WD upgrade Upgrades a 2WD Dyno Control Unit, DCU to 4WD.
DCU-DYNO cable length extension Extended cable length for flexibility in positioning the Dyno Control Unit, DCU.
UIM upgrade to SSD Upgrades User Interface & Measurement, UIM PC with Solid State Disk, SSD for increased resistance to extreme vehicle noise levels.
ROTOTEST® DynoVision™ Test Modules (available through rental)
Road Load Simulation ROTOTEST® DynoVision™ Test Module that simulates road resistance caused by aerodynamic drag, rolling resistance and road incline.
Active Inertia™ ROTOTEST® DynoVision™ Test Module that enables simulation of vehicle inertia during positive accelerations. Used in conjunction with Road Load Simulation.
Requires ROTOTEST® DynoVision™ Professional.
One Wheel Drive, 1WD ROTOTEST® DynoVision™ Test Module that allows tests to be conducted using a singe dynamometer units (one wheel).
Requires ROTOTEST® DynoVision™ Professional.
Powertrain Inertia Detection™ ROTOTEST® DynoVision™ Test Module for detection of powertrain inertia at different gears.
Requires ROTOTEST® DynoVision™ Professional.
Powertrain Inertia Correction™ ROTOTEST® DynoVision™ Test Module for correction of small variations in Steady Rate acceleration.
Requires ROTOTEST® DynoVision™ Professional.
Magic Ratio Detection™ ROTOTEST® DynoVision™ Test Module for detection of transmission ratios in manual transmissions.
DynoVision™ Modules / Options
ROTOTEST® DynoVision™ Professional Upgrade Upgrades ROTOTEST® DynoVision™ Basic to ROTOTEST® DynoVision™ Professional.
Calibration report ROTOTEST® DynoVison™ Report Module that documents all details relating to calibrating procedure.
Requires ROTOTEST® DynoVision™ Professional.
Project Manager ROTOTEST® DynoVision™ Report Module that documents time and operating time for specific projects.
Requires ROTOTEST® DynoVision™ Professional.
CANOut™ Basic ROTOTEST® DynoVision™ Module that enables distribution of dyno data on a CAN bus (20 Hz). Used for example to connect dyno with ECU for analysis in ECU software. Used with isolated CAN-USB hardware interface.
CANOut™ Professional ROTOTEST® DynoVision™ Module that enables distribution of dyno data on a CAN bus (100 Hz). Used for example to connect dyno with ECU for analysis in ECU software. Used with isolated CAN-USB hardware interface.
Requires ROTOTEST® DynoVision™ Professional.
Datmon™ Modules / Options
ROTOTEST® Datmon™ Professional upgrade Upgrades ROTOTEST® Datmon™ Basic to ROTOTEST® Datmon™ Professional.
LogOBD™ ROTOTEST® Datmon™ Module that enable logging of generic signals from vehicles with On-Board-Diagnostic, OBD system. Use with Bluetooth OBD device.
DatCAN™ Basic ROTOTEST® Datmon™ Module that enable logging of data on a CAN bus (20 Hz). Used with isolated CAN-USB interface. Used for example to display ECU data together with dyno data in ROTOTEST® Datmon™.
DatCAN™ Professional ROTOTEST® Datmon™ Module that enable logging of data on a CAN bus (100 Hz). Used with Isolated CAN-USB interface. Used for example to display ECU data together with dyno data in ROTOTEST® Datmon™.
Requires ROTOTEST® Datmon™ Professional.
System Accessories
ROTOTEST® Calibration Weights Specially designed calibration weights for optimal result during dynamometer torque calibration.
TCU Protecting steel meshes (pair) Protects Typhoon Cooling Unit during transport and handling. Recommended for portable use.
Dyno Control Unit, DCU 2WD Free standing Dyno Control Unit, DCU. Enables for example a 4WD system to be used as two independent 2WD systems.
User Interface & Measurement, UIM PC Complete industrial rack mounted PC for Dyno Control Unit, DCU with up-to-date Operating System.
ROTOTEST® Drive™ Electrical hub units for syncronizing wheel speeds of non-driven wheels to driven wheels.
Mounting Accessories
ROTOTEST® Wheel Adapters, slotted Slotted wheel adapters for easy fit in multi-car test production.
ROTOTEST® Wheel Adapters, multi-hole Long-life wheel adapters with multiple PCD patterns.
ROTOTEST® Wheel Adapters, customized Customized wheel adapters with specific centre bore for perfect fit and minimal run out.
ROTOTEST® Adapter Nuts and Bolts ROTOTEST® precision shoulder nuts and bolts for attaching the ROTOTEST® wheel adapter to the vehicle wheel hub. The bolts and nuts are hardened for corrosion protection and long service life.
Measurement & Connectivity Accessories
ROTOTEST® Datacq™ Data acquisition system. Completely modularized to suit any logging requirement.
Isolated CAN-USB interface Used in conjunction with CAN related modules.
Bluetooth OBD device Used in conjuction with OBD module.
Test cell Accessories
Spot cooling fan Electrical radial fan (2.2 kW) on wheels for spot cooling.
Exhaust extraction fan Electrical exhaust extraction fan (2.2 kW) for stationary use in test cell. Minimum exhaust extraction tube diameter 250 mm.