Change visitor typeROTOTEST Energy 2WD - Specification overview

ROTOTEST Energy 2WD

Specification overview

Maximum system performance
Power (maximum absorbed/generated)
Momentary
Continuous
100-390 kW / 134-522 bhp
100-200 kW / 134-268 bhp
Torque (maximum absorbed/generated at hubs)
Momentary
Continuous
+/- 2200-3900 Nm / 1623-2876 lb-ft
+/- 1180-1920 Nm / 870-1416 lb-ft
Speed (maximum hub speed)
Continuous +/- 2100-2700 rpm
Vehicle speed (equivalent, wheel dia 650 mm)
Maximum*
* = may be limited by continuous power
250-320 km/h / 155-195 mph
Measuring accuracy
Torque uncertainty < 1% of measured value
Speed uncertainty 0.1 rpm
Measurement repeatability < 0.05%


System details

Main parts
Dynamometer units 1 axle of Energy
System Central Unit 1 of SCU2E with Uninterruptible Power Supply, UPS
Main Power Unit 1 or 2 of MPU with Drives, Converters and main supply connectors
Standard accessories kit included, contains
  • Operators PC, monitor & keyboard
  • Electrical cables (excluding power supply)
  • Torque rod for calibration
  • Wheel Adapters, 4 stud
  • Wheel bolts M12x1.5 bolts
  • User and service manual (English)
Test modules
Constant Speed included, System controls speed to a pre-set value independent of load
Road Load Simulation included, Simulates on-road conditions, considering vehicle inertia (mass) and resistance caused by aerodynamic drag, tyre rolling resistance and road gradient
Test modules
ROTOTEST Calibration Report included, Documents all details relating to calibrating procedure


Test cell (site) requirements

General
Installation type above-ground, completely on-wheels, manoeuvrable by a single person
Additional cooling None (regenerative / air-cooled)
Maximum axle load 3500 kg
Operating environment
Ambient temperature range +15C to +40C
Relative humidity 10-90%, non-condensing
Altitude < 1000 m above sea level
Electrical power supply
Control system (SCU) single, 1 phase, 240 VAC (8A) or 120 VAC (16A)
AC drives / motors 2 x 400 VAC, 50/60Hz, 3 phase


Options & accessories

See all options and accessories



Request more info on ROTOTEST Energy


This information is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, or non-infringement.

The information herein may include technical inaccuracies or typographical errors. Changes may periodically be made to the information and will be incorporated in new editions of this document. Rototest may make improvements or changes in products and programs described in this publication at any time without incurring any obligations.